PV33 – Wavy Fixing Band
SHARE PRODUCT :
Available Options
| Article number | Product Name | Length [m] | Thickness [mm] | Width [mm] | Packing Type | Thumbnail | |
|---|---|---|---|---|---|---|---|
| 78105 | PV 33x1,5x30m | 30 | 1.5 | 33 | Plastic strap |  78105 |
PACKING, WEIGHTS, AND QUANTITIES |
Steel quality: DX51+Z275 |
|---|
THIS HEAVY-DUTY PERFORATED METAL FIXING BANDS IS USEFUL FOR ANY APPLICATION WHERE SECURE AND DURABLE BRACING OR SUPPORT IS NEEDED, AND WHERE TRADITIONAL FASTENING METHODS SUCH AS SCREWS OR NAILS MAY NOT BE APPROPRIATE OR SUFFICIENT.
IDEAL FOR ANY TYPE OF ATTACHMENT AND INSTALLATIONS ON THE INDUSTRIAL WORKSITE.
THE HOLES OF THIS PRODUCT PROVIDE SPACE FOR BOLTS TO SECURE THE FIXING BAND ONTO WALLS AND OTHER SURFACES. STEEL QUALITY DX51+Z275, CORROSION PROTECTION 275 G/M2 ON BOTH SIDES – CORRESPONDING TO A ZINC LAYER THICKNESS OF APPROX. 20 µm.
THE INSTALLATION PROCESS FOR THIS HEAVY-DUTY PERFORATED METAL FIXING BAND WILL VARY DEPENDING ON THE SPECIFIC APPLICATION BEING USED. HOWEVER, THERE ARE SOME GENERAL STEPS THAT CAN BE FOLLOWED:
- MEASURE AND MARK THE LOCATION WHERE THE BAND WILL BE INSTALLED. ENSURE THAT IT IS IN THE CORRECT POSITION AND ALIGNED PROPERLY.
- CUT THE BAND TO THE DESIRED LENGTH, LEAVING ENOUGH EXCESS TO CREATE A LOOP FOR FASTENING.
- USE A PAIR OF PLIERS TO BEND ONE END OF THE BAND INTO A LOOP. MAKE SURE THE LOOP IS LARGE ENOUGH TO ACCOMMODATE THE BOLT OR SCREW THAT WILL BE USED TO SECURE IT.
- SLIDE THE BAND OVER THE OBJECT YOU WANT TO SECURE.
- USE A SECOND PAIR OF PLIERS TO BEND THE OTHER END OF THE BAND. AGAIN, MAKE SURE IT IS LONG ENOUGH TO ACCOMMODATE THE BOLT OR SCREW THAT WILL BE USED TO SECURE IT.
- POSITION THE BAND AND SECURE IT TO THE STRUCTURE USING A BOLT OR OTHER APPROPRIATE FASTENER. ENSURE THAT IT IS TIGHTENED SECURELY.
- REPEAT THE PROCESS AS NECESSARY TO INSTALL ADDITIONAL BANDS.
NOTE THAT THE INSTALLATION PROCESS MAY BE MORE COMPLEX FOR SOME APPLICATIONS, SUCH AS SEISMIC OR WIND RESTRAINT, WHERE ADDITIONAL REINFORCEMENT MAY BE REQUIRED. IN THESE CASES, IT IS RECOMMENDED TO CONSULT WITH A PROFESSIONAL TO ENSURE PROPER INSTALLATION AND COMPLIANCE WITH LOCAL BUILDING CODES AND REGULATIONS.