PVM17 – BROWN
SHARE PRODUCT :
Available Options
| Article number | Product Name | Length [m] | Thickness [mm] | Width [mm] | Packing Type | Thumbnail | |
|---|---|---|---|---|---|---|---|
| 85304 | PVM 17x0,7x3m | 3 | 0.7 | 17 | Eco-Pack |  85304 |
PACKING, WEIGHTS, AND QUANTITIES |
Steel quality: DX51+Z275 Corrosion protection: 275g/m2 on both sides – corresponding to a zinc layer thickness of approximately 20 µm. Coating: Brown polyethylene powder, Temperature characteristics of the coating: -20 degree in cold, weaking/softening at 48 degree and melting at 107 degrees. |
||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PLASTIC COATED FIXING BANDS ARE COMMONLY USED IN A VARIETY OF APPLICATIONS WHERE A SECURE AND LONG-LASTING FASTENING SOLUTION IS REQUIRED. PLASTIC COATING HELPS TO PROTECT THE UNDERLYING MATERIAL FROM DAMAGE, CORROSION, AND OTHER FORMS OF WEAR AND TEAR.
MOST COMMON APPLICATIONS OF PLASTIC-COATED FIXING BANDS:
- PLUMBING AND HVAC SYSTEMS: OFTEN USED TO SECURE PIPES, DUCTWORK, AND OTHER COMPONENTS IN PLUMBING AND HVAC SYSTEMS. THE BANDS CAN BE EASILY ADJUSTED AND TIGHTENED TO ENSURE A SECURE FIT, AND THE PLASTIC COATING HELPS TO PROTECT AGAINST MOISTURE DAMAGE AND CORROSION.
- IN ELECTRICAL INSTALLATIONS, PLASTIC COATED FIXING BANDS CAN BE USED TO SECURE CABLES AND WIRES IN PLACE. DIFFERENT COATING COLORS CAN BE USED FOR EXAMPLE TO ACCOMMODATE AND MARK DIFFERENT CABLES IN THE SYSTEM. PLASTIC COATING HELPS TO PREVENT DAMAGE TO THE INSULATION ON THE WIRES.
- CONSTRUCTION AND BUILDING PROJECTS: PLASTIC COATED FIXING BANDS CAN BE USED TO SECURE BUILDING MATERIALS SUCH AS WOOD, METAL, AND CONCRETE. THEY CAN ALSO BE USED TO SECURE TEMPORARY STRUCTURES SUCH AS SCAFFOLDING OR TO SECURE FENCING AROUND CONSTRUCTION SITES.
- PLASTIC COATED FIXING BANDS ARE USED TO SECURE COMPONENTS IN MANY INDUSTRIAL APPLICATIONS. THEY CAN HELP TO PREVENT DAMAGE FROM VIBRATION AND OTHER TYPES OF MECHANICAL STRESS. THEY ALSO PREVENTS THE CORROSION BETWEEN DISSIMILAR METALS.
OVERALL, PLASTIC COATED FIXING BANDS ARE VERSATILE AND USEFUL FASTENING SOLUTIONS THAT CAN BE USED IN A WIDE RANGE OF APPLICATIONS. WE APPLY THERMOPLASTICS TO THE SURFACE OF THE METAL BAND TO PROVIDE LONG-TERM CORROSION, IMPACT AND CHEMICAL RESISTANCE WHILST OFFERING AN ATTRACTIVE SMOOTH FINISH WITH GOOD EDGE PROTECTION.
INSTALLING PERFORATED FIXING BANDS IS A SIMPLE PROCESS THAT CAN BE COMPLETED USING BASIC TOOLS AND TECHNIQUES. SOME GENERAL STEPS FOR INSTALLING PERFORATED FIXING BANDS:
- SELECT THE APPROPRIATE SIZE AND MATERIAL OF THE BAND FOR YOUR APPLICATION. CONSIDER THE WEIGHT OF THE OBJECT TO BE SECURED AND ANY ENVIRONMENTAL CONDITIONS THAT MAY AFFECT THE BAND’S STRENGTH.
- MEASURE AND MARK THE LOCATION WHERE THE BAND WILL BE INSTALLED. ENSURE THE CORRECT POSITION AND PROPER ALIGNMENT.
- WRAP THE BAND AROUND THE OBJECT TO BE SECURED, ENSURING THAT IT IS SNUG BUT NOT TOO TIGHT.
- CUT THE BAND TO THE DESIRED LENGTH USING WIRE CUTTERS OR TIN SNIPS, LEAVING ENOUGH SPACE FOR FASTENING. BE SURE TO WEAR PROTECTIVE GLOVES AND EYE GEAR WHEN CUTTING THE BAND.
- SLIDE THE BAND OVER THE OBJECT YOU WANT TO SECURE (SUCH AS A PIPE OR CABLE).
- THE PERFORATED HOLES ON THE BAND PROVIDE SPACE FOR SCREWS, NAILS, PINS AND BOLTS TO SECURE THE FIXING BAND ONTO WALLS AND OTHER SURFACES. USE A SCREWDRIVER OR DRILL TO ATTACH THE BAND TO THE DESIRED OBJECT, USING PROPER FASTENER.
- BE SURE TO POSITION THE FASTENERS EVENLY ALONG THE BAND TO DISTRIBUTE THE LOAD.
- IF NECESSARY, USE PLIERS OR A HAMMER TO BEND THE BAND TO THE DESIRED ANGLE OR SHAPE.
- REPEAT THE PROCESS AS NECESSARY TO INSTALL ADDITIONAL FIXING BANDS.
- CHECK THE BAND PERIODICALLY TO ENSURE THAT IT REMAINS SECURE AND HAS NOT LOOSENED OVER TIME.
IF YOU ARE UNSURE ABOUT THE INSTALLATION PROCESS, CONSULT WITH A PROFESSIONAL ENGINEER OR EXPERT IN THE FIELD TO ENSURE THAT THE BAND IS INSTALLED SAFELY AND EFFECTIVELY. IT IS IMPORTANT TO FOLLOW THE APPLICABLE BUILDING CODES OR REGULATIONS WHEN INSTALLING THESE BANDS.