UVAHM15 – WHITE (PPA Coated, A4)
SHARE PRODUCT :
Available Options
| Article number | Product Name | Length [mm] | Thickness [mm] | Width [mm] | Packing Type | Thumbnail | |
|---|---|---|---|---|---|---|---|
| 79003 | UVAHM 15x0,5x30m | 30 | 0.5 | 15 | Lock |  79003 |
PACKING, WEIGHTS, AND QUANTITITES |
Steel quality: Stainless 1.4404 2B – comparable to AISI 316 and A4, Euronorm: EN 10088-2 |
|||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
THIS PRODUCT OUTLASTS MOST, IF NOT ALL TRADITIONAL COATED OR STAINLESS-STEEL FIXING BANDS IN TERMS OF UV, SALT-SPRAY AND POLLUTION RESISTANCE, FLEXIBILITY, RESISTANCE TO SAND ABRASION AND COLD TEMPERATURE PROPERTIES.
THE COATING OF UVAHM15 IS DONE WITH HIGH PERFORMANCE POLYAMIDE POWDERS OVER THE ACID-PROOF STAINLESS STEEL (A4)
OUR STAINESS STEEL FIXING BANDS IN COMBINATION WITH PPA COATING IS THE BEST SOLUTION FOR SECURING AND SUPPORTING VARIOUS COMPONENTS AND SYSTEMS IN THE MOST AGGRESSIVE ENVIRONMENTS.
INSTALLING THE FIXING BANDS IS A SIMPLE PROCESS THAT CAN BE COMPLETED USING BASIC TOOLS AND TECHNIQUES. SOME GENERAL STEPS FOR INSTALLING PERFORATED FIXING BANDS:
- SELECT THE APPROPRIATE SIZE AND MATERIAL OF THE BAND FOR YOUR APPLICATION. CONSIDER THE WEIGHT OF THE OBJECT TO BE SECURED AND ANY ENVIRONMENTAL CONDITIONS THAT MAY AFFECT THE BAND’S STRENGTH.
- MEASURE AND MARK THE LOCATION WHERE THE BAND WILL BE INSTALLED. ENSURE THE CORRECT POSITION AND PROPER ALIGNMENT.
- WRAP THE BAND AROUND THE OBJECT TO BE SECURED, ENSURING THAT IT IS SNUG BUT NOT TOO TIGHT.
- CUT THE BAND TO THE DESIRED LENGTH USING WIRE CUTTERS OR TIN SNIPS, LEAVING ENOUGH SPACE FOR FASTENING. BE SURE TO WEAR PROTECTIVE GLOVES AND EYE GEAR WHEN CUTTING THE BAND.
- SLIDE THE BAND OVER THE OBJECT YOU WANT TO SECURE (SUCH AS A PIPE OR CABLE).
- USE A DRILL TO ATTACH THE BAND TO THE DESIRED OBJECT, USING PROPER FASTENER.
- BE SURE TO POSITION THE FASTENERS EVENLY ALONG THE BAND TO DISTRIBUTE THE LOAD.
- REPEAT THE PROCESS AS NECESSARY TO INSTALL ADDITIONAL FIXING BANDS.
- CHECK THE BAND PERIODICALLY TO ENSURE THAT IT REMAINS SECURE AND HAS NOT LOOSENED OVER TIME.
IF YOU ARE UNSURE ABOUT THE INSTALLATION PROCESS, CONSULT WITH A PROFESSIONAL ENGINEER OR EXPERT IN THE FIELD TO ENSURE THAT THE BAND IS INSTALLED SAFELY AND EFFECTIVELY. IT IS IMPORTANT TO FOLLOW THE APPLICABLE BUILDING CODES OR REGULATIONS WHEN INSTALLING THESE BANDS.
UVAHM15 – WHITE (PPA Coated, A4)
SHARE PRODUCT :
Available Options
| Article number | Product Name | Length [mm] | Thickness [mm] | Width [mm] | Packing Type | Thumbnail | |
|---|---|---|---|---|---|---|---|
| 79003 | UVAHM 15x0,5x30m | 30 | 0.5 | 15 | Lock | 79003 |
| PRODUCT CODE | PRODUCT NAME | TYPE | LENGHT | WIDTH mm |
THICKNESS mm |
PACKING TYPE | PACKING SIZE mm |
WEIGHT kg | PCS/ BOX | BOX WEIGHT kg |
BOX SIZE mm |
PCS/ PALLET | PALLET WEIGHT kg |
PALLET HEIGHT cm |
EAN ITEM | EAN BOX | ||
| 79003 | UVAHM 15×0,5x30m | Stainless, Plastic-coated, Straight | 30 m | 15 | 0.5 | Plastic tie | 265x265x18 | 2.079 | 8 | 16.86 | 271x255x197 | 288 | 627 | 74.1 | 6438279790034 | 16438279790031 | ||
Steel quality: Stainless 1.4404 2B – comparable to AISI 316 and A4, Euronorm: EN 10088-2
Coating: Polyamide, Temperature characteristics of the coating: -78 degree in cold, weaking/softening at 70 degree and melting at 105 degrees
THIS PRODUCT OUTLASTS MOST, IF NOT ALL TRADITIONAL COATED OR STAINLESS-STEEL FIXING BANDS IN TERMS OF UV, SALT-SPRAY AND POLLUTION RESISTANCE, FLEXIBILITY, RESISTANCE TO SAND ABRASION AND COLD TEMPERATURE PROPERTIES.
THE COATING OF UVAHM15 IS DONE WITH HIGH PERFORMANCE POLYAMIDE POWDERS OVER THE ACID-PROOF STAINLESS STEEL (A4)
OUR STAINESS STEEL FIXING BANDS IN COMBINATION WITH PPA COATING IS THE BEST SOLUTION FOR SECURING AND SUPPORTING VARIOUS COMPONENTS AND SYSTEMS IN THE MOST AGGRESSIVE ENVIRONMENTS.
INSTALLING THE FIXING BANDS IS A SIMPLE PROCESS THAT CAN BE COMPLETED USING BASIC TOOLS AND TECHNIQUES. SOME GENERAL STEPS FOR INSTALLING PERFORATED FIXING BANDS:
- SELECT THE APPROPRIATE SIZE AND MATERIAL OF THE BAND FOR YOUR APPLICATION. CONSIDER THE WEIGHT OF THE OBJECT TO BE SECURED AND ANY ENVIRONMENTAL CONDITIONS THAT MAY AFFECT THE BAND’S STRENGTH.
- MEASURE AND MARK THE LOCATION WHERE THE BAND WILL BE INSTALLED. ENSURE THE CORRECT POSITION AND PROPER ALIGNMENT.
- WRAP THE BAND AROUND THE OBJECT TO BE SECURED, ENSURING THAT IT IS SNUG BUT NOT TOO TIGHT.
- CUT THE BAND TO THE DESIRED LENGTH USING WIRE CUTTERS OR TIN SNIPS, LEAVING ENOUGH SPACE FOR FASTENING. BE SURE TO WEAR PROTECTIVE GLOVES AND EYE GEAR WHEN CUTTING THE BAND.
- SLIDE THE BAND OVER THE OBJECT YOU WANT TO SECURE (SUCH AS A PIPE OR CABLE).
- USE A DRILL TO ATTACH THE BAND TO THE DESIRED OBJECT, USING PROPER FASTENER.
- BE SURE TO POSITION THE FASTENERS EVENLY ALONG THE BAND TO DISTRIBUTE THE LOAD.
- REPEAT THE PROCESS AS NECESSARY TO INSTALL ADDITIONAL FIXING BANDS.
- CHECK THE BAND PERIODICALLY TO ENSURE THAT IT REMAINS SECURE AND HAS NOT LOOSENED OVER TIME.
IF YOU ARE UNSURE ABOUT THE INSTALLATION PROCESS, CONSULT WITH A PROFESSIONAL ENGINEER OR EXPERT IN THE FIELD TO ENSURE THAT THE BAND IS INSTALLED SAFELY AND EFFECTIVELY. IT IS IMPORTANT TO FOLLOW THE APPLICABLE BUILDING CODES OR REGULATIONS WHEN INSTALLING THESE BANDS.